Announcement of Courses

CREDIT, DEGREE APPLICABLE COURSES:

AUTO 51. Automotive Electrical (8)
Lec-6, lab-6, field trips
Prereq.: AUTO 50 or pass Challenge Test
Repeat: max. 24 units
A basic course focusing on automotive electrical systems including basic electrical theory, battery technology, starting systems, charging systems, lighting systems, instrumentation and wiring. A technical course focusing on higher-level electrical troubleshooting including the use of digital volt ohm meters, digital storage oscilloscopes, scan tools, and engine analyzers in the diagnosis and repair of modern automotive electronics. Students will prepare for Official State Lamp Adjusting License and ASE A6 and L-1 Examinations. CSU

AUTO 52. Brakes, Suspension, Alignment (8)
Lec-6, lab-6, field trips
Prereq.: AUTO 50 or pass Challenge Test
Repeat: max. 24 units
Principle of construction, mechanical operation, preventive maintenance and repair of vehicle braking systems, including computer operated systems, Anti-Lock Brake Systems (ABS) Preparation, Automotive Service Excellence (ASE) testing, Brake Certification, and State Brake License. Principles of construction, mechanical operation, preventive maintenance and repair of suspension systems, wheel alignment and wheel balancing. Preparation for A. S. E. certification. CSU

AUTO 53. Automatic and Manual Transmissions (8)
Lec-6, lab-6, field trips
Prereq.: AUTO 50 or pass Challenge Test
Repeat: max. 24 units
Instruction in diagnosis and servicing of automatic and manual transmissions, clutches, 4-wheel drives, drive shafts, differentials, and electronic sensing devices. Preparation is given for national certification test.CSU

AUTO 54. Engine Repair (8)
Lec-6, lab-6, field trips
Prereq.: AUTO 50 or pass Challenge Test
Repeat: max. 24 units
A hands-on course focusing on the analysis of engine problems and proper steps in repair procedures, including cooling and exhaust systems and timing belt replacements as well as the disassembly, precision measurement, analysis of potential engine failures, reconditioning, and rebuilding of automotive engines. CSU

AUTO 55. Engine Performance/Drivability (8)
Lec-6, lab-6, field trips
Prereq.: AUTO 50 or pass Challenge Test
Repeat: max. 24 units
Course focus is on maintenance and troubleshooting including the use of analog and digital volt ohm meters, digital storage oscilloscopes, scan tools, and engine analyzers, vacuum and pressure gauges in the diagnosis and repair of modern automotive ignition, fuel, and emission, systems. Preparation for National Certification (ASE A8 and L-1 Engine Performance) Examinations, students become familiar with trade practices in the testing and replacement of ignition system components, vehicle fuel and emission systems testing, component testing and replacement. CSU

AUTO 60. Independent Study (Auto Technology) (1-3)
Ind st-5, 10, 15, conf-1, field trips                         P/NP available
Advise: Completion of at least 16 units in Automotive Technology or consent of instructor. Student must obtain approval of project from instructor.
Repeat: max. 2, 4, 6 units
Research and application of advanced skills within the topic of Automotive/Trade Skills. Allows student to investigate subjects of special interest and develop skills toward those interests, such as frame design and fabrication, suspension design and fabrication, engine performance modification and drivability computer. CSU

AUTO 61. Independent Study (Auto Body) (1-3)
Ind st-5, 10, 15, conf-1, field trips                         P/NP available
Advise: Completion of at least 16 units in Auto Body Trade Skills or consent of instructor. Student must obtain approval of project from instructor.
Repeat: max. 2, 4, 6 units
Research and application of advanced skills within the topic of Auto Body Trade Skills. Allows student to investigate subjects of special interest and develop skills toward those interests, such as frame design and fabrication, suspension design and fabrication, sheet metal and fiberglass design and fabrication and show vehicle preparation. CSU

AUTO 62. Independent Study (Motorcycle Small Engine Repair) (1-3)
Ind st-5, 10, 15, conf-1, field trips                         P/NP available
Advise: Completion of at least 6 units in Motorcycle and Small Engine Repair, or consent of instructor. Student must obtain approval of project from instructor.
Repeat: max. 2, 4, 6 units
Research and application of advanced skills within the topic of Motorcycle and Small Engine Repair. Allows student to investigate subjects of special interest and develop skills toward those interests, such as Frame Design and Fabrication, Suspension Design and Fabrication, Engine Performance Modification and Sheet Metal Design and Fabrication. CSU

AUTO 96. Basic Automotive Welding (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
Course is directed toward the knowledge and skills needed by collision repair technicians. Introduction of specialized equipment as outlined by I-Car for auto collision repair. Repairing, replacing and welding collision damaged auto body parts. Utilizing the automotive frame rack for straightening and welding of the auto frame. Students will learn the proper procedures and equipment applications as they apply to auto collision techniques. CSU

AUTO 98. Specialty Electronics (3)
Lec-2, lab-4, field trips
Prereq.: AUTO 90A, 90B and 93
Repeat: max. 9 units
A technical course focusing on higher level electrical troubleshooting including the use of digital volt ohm meters, digital storage oscilloscopes, scan tools, and engine analyzers in the diagnosis and repair of modern automotive electronics. Preparation for the Official State Lamp Adjusting Licensing and National Certification (ASE L-1 Advanced Engine Performance) Examination. CSU

AUTO 105. Auto Electronics I - Advanced Tune-Up (3)
Lec-2, lab-4, field trips
Advise: Eligible for ENGL 94 or ESL 160 or 82, and MATH 840
Repeat: max. 6 units
Instruction is designed to develop skills and practices in automotive tune-ups to manufacture specifications. Includes use of electronic scopes, meters, test equipment, diagnosis of malfunctions, the exhaust emission control systems, ignition scopes, power cylinder balance, Tach and Dwell meters, infrared meters, percentages of monoxides, carburation, electricity, and other concepts and practices. CSU

AUTO 106. Auto Electronics II- Electrical Diagnosis (1.5)
Lec-2, lab-4, field trips (8 wks)
Prereq.: AUTO 105
A study of and practice in electronic diagnosis and repair of automotive electrical systems using modern electronic testing equipment, including the use of electrical and electronic testing equipment; the use and interpretation of wiring diagrams, shop manuals, common practices for trouble shooting electrical problems and other practices. CSU

AUTO 107. Auto Electronics III - Fuel Injection (3)
Lec-2, lab-4, field trips
Prereq.: AUTO 105 and 106
Study of automotive and light truck fuel injection systems emphasizing the basic principles of diagnosis and repair of these systems. Demonstration and practice are offered on bench and operational vehicle systems. Instruction includes the development of a systematic procedure for testing and troubleshooting fuel injection systems. CSU

AUTO 109. Auto Electronics V-Ford Computers (1.5)
Lec-2, lab-4, field trips (8 wks)
Prereq.: AUTO 107
The history, operation, and diagnosis of Ford's Electronic Engine Control systems (EEC), Distributorless Ingition System (DIS), ABS brakes, and other Ford computer controlled systems emphasis on the use of special test equipment and proper diagnostic procedures. CSU

AUTO 109A. Advanced Ford Computers (1.5)
Lec-2, lab-4 (8 wks)
Repeat: max. 4.5 units
Review and practice of diagnosis of FORD's Electronic Engine Control systems, Distributorless Ignition System, ABS brakes and other FORD computer controlled systems. CSU

AUTO 111. Auto Electronics VI-G.M. Computers (1.5)
Lec-2, lab-4, field trips (8 wks)
Prereq.: AUTO 107
Diagnosis and repair of General Motors automotive computers and related systems, General Motors including the identification and analysis of problems, trouble shooting practices and maintenance of unit; the procedures for diagnosis of computer units including removal, disassembly, repair, reassembly, and replacement of units in General Motors manufactured vehicles. CSU

AUTO 112. Clean Air Car Course (Basic) (3)
Lec-5, lab-1, field trips (8 wks)
Advise: ENGL 92 or ESL 160 or 82 or placement in ENGL 93 or 94; or ESL 170; MATH E or BSMA G, H or J
Repeat: max. 6 units
Preparation for the Bureau of Automotive Repair Smog Check Licensing Exam. Smog check rules, regulations and updates; emission systems; test and repair procedures; TAS machine operation; and test (exam) preparation. CSU

AUTO 113. Gasoline Engines Diagnosis and Repair (3)
Lec-2, lab-4
Theory, operation and diagnosis of the four-stroke cycle internal combustion engine, and how different designs and configurations effect power, economy, drivability and smog. Systems covered: cooling, lubrication, fuel, intake, exhaust, and ignition. CSU

AUTO 120. Automotive Welding (6)
Lec-5, lab-10
Prereq.: ENGL 90 or ESL 72 or 150
Development of proficiency in automotive repair welding and experiencing welding and cutting techniques used in the repair. Includes welding and cutting techniques, equipment, and current safety/environmental trade practice. CSU

AUTO 121. Metal Repair and Welding (8)
Lec-5, lab-10, field trips
Principles of modern automobile construction; basic techniques of electric-arc and oxyacetylene welding as applied to automotive metal repair; principles of expansion and contraction applied to reclamation of damaged structures; prepation for A.S.E. Certification. CSU

AUTO 122. Panels, Glass, Trim and Hardware (8)
Lec-5, lab-10, field trips
Procedures related to the assembly and disassembly of automotive body and fender components. Removal and replacement of side panels, bumpers, windshields and windows, broken braces and inner structural members, and trim mouldings. CSU

AUTO 123. Frame Straightening and Aligning (8)
Lec-5, lab-10, field trips
Techniques of straightening and aligning automotive frames and structural members using alignment rack and testing equipment. Application of hand tools and equipment to align frames, torsion bars, axles, wheels and steering mechanisms. Preparation for A.S.E. Certification. CSU

AUTO 124B. Surface Preparation and Painting (8)
Lec-5, lab-10, field trips
Advanced phases of auto body paint/finish repair techniques including preparing metal and plastic surfaces, masking, and painting/finishing. Modern automotive coatings and trim service. Current safety and environmental trade practices. Pending NATEF approval. CSU

AUTO 125. Body Repair and Refinishing (3)
Lec-2, lab-4, field trips
Advise: Eligible for ENGL 94 or ESL 160 or 82 and MATH 840
Repair and refinishing of automotive bodies and fenders including recommended practices for repair of body parts, frame straightening and alignment, basic soldering, plastic filler materials and techniques, gas and arc welding, mig welding, preparation of surfaces, painting, finishing and detailing, estimating of labor, materials, parts and supplies for auto body repair. CSU

AUTO 126. Principles of Auto Body Repair (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
Metal finishing techniques including mig and oxyacetylene, welding, application of plastic fillers and body solder, principles of metal working unibody and frame repair alignment. Preparation for entry level employment in auto repair. CSU

AUTO 127. Preparation and Refinishing (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
Procedures for removing old finishes, moldings, trim. Preparation of surfaces, sanding, filling scratches, using putty and primers, techniques of mixing paints, applying paints, use of spray and polishing equipment. CSU

AUTO 128. Frame Straightening and Alignment (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
Techniques and procedures applied to straightening and aligning automotive frames and structural members using alignment rack and equipment. Application of tools and measuring devices to align frames and unibodies. CSU

AUTO 129. Auto Body Trim and Hardware (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
Procedures related to assembly and disassembly of automotive body and fender components. Removal and replacement of side panels, windshields, braces, inner structural members, trim, upholstery, moldings and bumper assemblies. CSU

AUTO 131. Electrical Vehicle Conversion (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
The history and artistry of early electric vehicles and the impact of American culture and economics on the development of alternative fueled vehicles and vice-versa. How to analyze and evaluate fossil fueled vehicles as candidates for electric power conversion. Hands-on application of basic electrical systems design and diagnosis, electric vehicle control, power train systems theory operation and installation, and vehicle body modification and fabrication of parts. CSU

AUTO 133. Work Experience (1-4)
Work-minimum paid supervised 75-300 hrs or unpaid supervised 30-240 hrs plus coordinating conferences and individual meetings by arrangement
Coreq.: Enrollment in at least 7 semester units including this course and consent of instructor
Advise: Completion of at least 8 semester units of Automotive program courses
Repeat: combination max. 12 units
Supervised employment involving automotive related duties. CSU

AUTO 134. Work Experience - Smog Intern Paid (4)
Lec-1, work-300
Prereq.: AUTO 90A, 90B, 93 and 112
Coreq.: Enrollment in at least 7 semester units including this course and consent of instructor
Advise: AUTO 133; Completion of at least 8 semester units of Autotmotive program courses
Repeat: max. 12 units
Supervised employment involving automotive related duties as related to Smog Repairs. Student must provide tune-up hand tools (i.e., spark rockets, ratchets, timing light). CSU

AUTO 135. Domestic Electronic Engine Controls OBD-I-II (3)
Lec-3, lab-3, field trips
Repeat: max. 9 units
An in depth study into Domestic Automotive Engine Computer Control OBD-I-II Systems. Exploration of the operation, diagnosis, and repair of Domestic Automotive Electronic Engine Computer Control Systems. General diagnosis will be emphasized using multimeters, scan tools, manuals, and lab scopes. CSU

AUTO 137. Gaseous Alternative Fuel Systems (3)
Lec-3, lab-1, field trips
Repeat: max. 9 units
A course to familiarize students with the following as related to gaseous fuels: 1)purpose of alternative fuels, 2)alternative fuels legislation, 3)refueling procedures, 4)fuel system inspection, 5)system components nomenclature, 6)system adjustment, 7)component replacement, 8)drivability and diagnosis. CSU

AUTO 138. Automatic Transmissions and Transaxles (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
An in-depth study of automatic transmissions and transaxles. Basic study of electronic controls. General diagnosing using manuals, multimeters, flow charts and scan tools, along with pressure gauges. CSU

LBCS 96B. Labor Relations in the Automotive Industry (3)
See "Labor and Community Studies" listings for course description.

MOTO 61. Custom Metal Fabrication (3)
Lec-2, lab-3, field trips
Repeat: max. 9 units
Students will develop the skills necessary to cut, shape, weld, and fabricate various types of metal products from raw materials. Usage of MIG, TIG, gas welding, English Wheel, Power Hammer, and various other metal shaping equipment and techniques will be presented. CSU

MOTO 62. Custom Design and Assembly (3)
Lec-2, lab-3, field trips
Repeat: max. 9 units
This course will give the student working knowledge of the necessary skills required to design and assemble a custom motorcycle. Students will conceptualize design parameters, research component vendors, estimate parts costs, and plan and execute assembly strategies. CSU

MOTO 63. Auto-Moto Custom Painting (3)
Lec-2, lab-4, field trips
Repeat: max. 9 units
Topics covered will be: surface preparation, base coating, mid coating, clear coating, graphic layout and airbrush techniques for the purpose of custom automotive, motorcycle and related fields. This course may require a materials fee for take home projects. CSU
Formerly AUTO 132

MOTO 80. Intro: Motorcycle Design/Maint. (5)
Lec-5, field trips                               P/NP available
Repeat: max. 15 units
This course is designed to give students an overview of the history of motorcycles as well as a discussion of modern machines. Students will learn of the theory of operation and design principles involved in motorcycle maintenance. CSU

MOTO 81. Fuel, Lubrication and Cooling (4)
Lec-3, lab-3, field trips                     P/NP available
Prereq.: MOTO 60 or 80
Repeat: max. 12 units
This course covers the principles, theory of operation, design and functions of motorcycle fuel, lubrication and cooling systems as well as the inspection, disassembly, cleaning, measuring and rebuilding of the components of those systems. Upon completion of this class, a student should be able to perform preventive maintenance, troubleshoot discrepancies, repair the system components and know how to select suitable aftermarket parts in both dealer and independent shop settings. CSU

MOTO 82. Motorcycle Tune-up/Service (4)
Lec-3, lab-3, field trips                     P/NP available
Prereq.: MOTO 80
Repeat: max. 12 units
This course covers motorcycle tune-up, general service, ignition, valve adjustment, lubrication, oil and filter changes as well as the special tools required. Further, it covers service, parts books, micro-fiche, computerized manuals and the logic employed in them. Upon completion of this class, a student should be able to perform virtually all aspects of scheduled maintenance such as tune-ups, valve adjustment, oil changes and lubrication service as well as troubleshoot and repair common maintenance discrepancies. CSU

MOTO 83. Motorcycle Electrical Systems (4)
Lec-3, lab-3, field trips                     P/NP available
Prereq.: MOTO 80
Repeat: max. 12 units
This course covers the principles of basic electricity including terms, circuits, wiring diagrams and symbols, magnetism and methods of providing electrical energy for motorcycles. Various electrical components of generation, regulation, distribution, control, switching and methods of testing of motorcycle electrical systems will be discussed. Ignition systems and how they relate to the engine components will be covered. CSU

MOTO 84. Engine Theory (4)
Lec-3, lab-3, field trips                     P/NP available
Prereq.: MOTO 60 or 80
Repeat: max. 12 units
This course offers a comprehensive view of how two and four-stroke motorcycle engines work through discussion of the theory of operation and technical principles involved in converting fuel to motion. This course is designed to give students the technical understanding necessary for working with modern internal combustion engines and students will learn the theory necessary in understanding the internal combustion engine. CSU

MOTO 85. Motorcycle Frame/Wheels/Brakes (4)
Lec-3, lab-3, field trips                    P/NP available
Prereq.: MOTO 80
Repeat: max. 12 units
This course covers the theory, design and function of motorcycle exhaust systems, various frame and suspension designs, tires, cast and spoked wheels, and both disk and drum brakes. Upon completion of this course, a student should be able to perform preventive maintenance, troubleshoot discrepancies, repair systems and know how to select suitable aftermarket parts in both a dealer and independent shop setting. CSU

MOTO 86. Motorcycle Engine Overhaul (3)
Lec-2, lab-3, field trips                    P/NP available
Prereq.: MOTO 60 or 80
Repeat: max. 9 units
This course offers a comprehensive view of overhaul techniques, pre tear down diagnostics and post repair operations check of modern motorcycle engines. Repair procedures will be consistent with manufactures and professional repair standards. Upon the successful completion of this class, a student will be able to perform a complete overhaul of the varius types of modern motorcycle engines including water-cooled, multi-valve, and air-cooled V-twins engines. The student will be able to analyze various aspects of performance modifications. CSU

MOTO 87. Power Transmission Systems (4)
Lec-3, lab-3, field trips                     P/NP available
Prereq.: MOTO 80
Repeat: max. 12 units
This course covers motorcycle power transmission systems. Converting mechanical power produced at the crankshaft to the rear wheel through clutch, transmission and the final drive system. Theory of operation including lubrication requirements, gear ratios, design and function of the primary drive, the clutch, the transmission and the final drive will be covered. Clutches, transmissions, and drive systems will be removed, disassembled, cleaned, inspected, measured, rebuilt, installed and inspected for proper operation. CSU

MOTO 88. Motorcycle Dyno Testing/Repair (2)
Lec-1, lab-3, field trips                       P/NP available
Prereq.: MOTO 80
Repeat: max. 6 units
This is an in-depth course covering motorcycle engine, component theory and function as related to dynamometer (dyno) operation. A dyno is used for data acquisition of operating conditions and used to diagnosis and troubleshoot performance problems. Various motorcycles will be run on a dyno so students can use the data to trouble-shoot maintenance problems. After repairs or adjustments, the motorcycles will be run again to measure the results. CSU

NONCREDIT COURSES:

TIAU 9513. Basic Auto Maintenance (54 hrs)
Emphasis is on the proper operation, maintenance, and interdependence of the various units of the automobile. Includes the design and construction of the engine and the various systems of the automobile.

TIAU 9530. Air Conditioning, Automotive (48 hrs)
Advise: TIAU 9512
Repair of automotive air conditioning systems including identifying problems, "trouble-shooting" practices, leak detection and maintenance procedures. Includes diagnosis, removal, repair, reassembly of components and replacement of units for automotive air conditioning systems.

TIAU 9532. Lamp License Preparation, Automotive (48 hrs)
Advise: TIAU 9512
Preparation for the State of California Automotive Lamp Adjusting License. Includes practices and procedures for the installation and adjustment of motor vehicle lamp systems and study of California laws and regulations related to the installation and adjustment of motor vehicle lamp systems.

TIAU 9533. Brake License Preparation, Automotive (48 hrs)
Advise: TIAU 9515
Preparation for the State of California Automotive Brake Adjusting License. Repair and maintenance of automotive brake systems consistent with California regulations pertaining to brake adjusting and station operation, and with industrial standards. Completion of certificates of compliance under California regulations.

TIAU 9535. Smog Control For Levels I & II (16 hrs)
Advise: TIAU 9522, 9511, 9512, and 9515
Study of and practice in automotive smog systems in reference to California Requirements. Level I includes use of smog check inspection & repair manuals, emission control system applications guide, automotive emission control repair manual and completion of the California Inspection worksheet. Level II includes use of a BAR approved TAS analyzer for vehicle inspection, performance of functional test procedures and performance of complete inspections on a minimum of five vehicles.

TIAU 9538. Automotive Electronics VII - Computers/Chrysler (48 hrs)
Advise: TIAU 9512 and 9539
Diagnosis and repair of automotive computers and related systems in Chrysler manufactured vehicles. Instruction includes the identification and analysis of problems, trouble shooting practices and maintenance of units. Also covered are the procedures for diagnosis of computer units, removal, disassembly, repair, reassembly and replacement of units in Chrysler manufactured vehicles.

TIAU 9539. Automotive Electronics IV - Introduction to Computers (48 hrs)
Advise: ABE 2074; TIAU 9523 and 9512
Concepts, principles and practices for automotive computers and control systems including demonstrated use of testing meters and circuit testing devices. Students will demonstrate concepts and practices for diagnosis and testing. Instruction includes reasons for computer controls, solid-state ignition systems, how computers work, twelve (12) computer functions in automobiles and input and output devices used in automobiles.
 hrs)
TIAU 9541. Emission Control and Computer Systems (108 hrs)
Advise: TIAU 9517, 9536, and 9539
Diagnosis and repair of automotive emission control and computer systems.